| Model |
| Manufacturer |
Barber Colman |
| Model |
No. 3 (6-10) |
| Serial Number |
883 |
| Year of manufacture |
???? |
| Mechanical Specifications |
| Pitch rating |
16 |
DP |
1.5875 |
Mod |
| Maximum workpiece diameter |
5.000 |
in |
127 |
mm |
| Maximum facewidth |
7.000 |
in |
177.8 |
mm |
| Maximum radial center distance |
3.875 |
in |
98.425 |
mm |
| Minimum radial center distance |
0.750 |
in |
19.05 |
mm |
| Maximum axial travel |
10.562 |
in |
268.2748 |
mm |
| Worktable diameter |
4.000 |
in |
101.6 |
mm |
| Index worm gear diameter |
6.000 |
in |
152.4 |
mm |
| Worktable Starts |
1 |
Threads |
| Maximum hob diameter |
2.062 |
in |
52.3748 |
mm |
| Maximum hob shift travel |
1.250 |
in |
31.75 |
mm |
| Maximum swivel angle |
-45 |
deg |
45 |
deg |
| Axial feed rate inch |
0.015 |
to |
0.15 |
inch |
| Axial feed rate metric |
0.381 |
to |
3.81 |
inch |
| Hob Spindle Range 1 |
133 |
RPM |
| Hob Spindle Range 2 |
157 |
RPM |
| Hob Spindle Range 3 |
183 |
RPM |
| Hob Spindle Range 4 |
230 |
RPM |
| Hob Spindle Range 5 |
309 |
RPM |
| Hob Spindle Range 6 |
388 |
RPM |
| Hob Spindle Range 7 |
453 |
RPM |
| Hob Spindle Range 8 |
533 |
RPM |
| Length |
50.500 |
in |
1282.7 |
mm |
| Width |
28.000 |
in |
711.2 |
mm |
| Height |
51.750 |
in |
1314.45 |
mm |
| Main Motor Power |
2 |
HP |
1.5 |
kW |
| Machine Weight |
1975 |
lbs |
896 |
kg |
| Plant power |
480 |
VAC |
60 |
Hz |
| Features |
| Single Thread Index Worm (Standard Accuracy) |
| Complete coolant system |
| Controls |
| Relay Logic |
| Machine Recertification Program |
| All broken electrical wires and cables will be repaired |
| All cycles will be tested and verified as fully functional |
| All defective controls will be replaced or repaired |
| All defective sensors will be replaced |
| All features will be tested and verified as fully functional |
| All filters will be changed |
| All worn hoses will be replaced |
| Coolant system checked for problems |
| Coolant tank and chip collection system cleaned |
| Hob head will be checked for problems |
| Hydraulic system drained and cleaned |
| Machine will be thoroughly cleaned |
| Ways and gibs checked for problems |
| Work table drive system checked for problems |
| Machine Includes |
| Integral Coolant Tank |
| One .500" hob arbor and nut |
| Two copies of the operations manuals |
| Two copies of the maintenance documentation |
| 30 Day return warranty on the machine |
| |
|
|
|
|
| The aforementioned description and listing of specifications and accessory equipment is correct and accurate to the best of our knowledge. However, it should not be considered binding in any regard, as we reserve the right to change and/or alter same without prior notice. Consequently the buyer is responsible for confirming same, upon physical inspection and inventory of the machine(s) and all related accessory equipment. |
