| Model |
| Manufacturer |
Lorenz |
| Model |
LS-180 |
| Serial Number |
14167 |
| Year of manufacture |
1983 |
| Description |
| This machine is being offered in recertified condition. We can also offer it with a full rebuild or recontrol if desired (Call for details). All recertified machines are fully cleaned. All moving slides, spindles and parts handling systems are inspected for problems. Any gibs or adjustable backlash systems are adjusted to the best possible settings. All hydraulic, coolant, lubrication and pneumatic systems are checked for proper functionality and leaks. All filters are replaced. All worn hoses, broken cables, connectors, buttons, lamps and wires are replaced. All guarding is installed and checked. All machine cycles are tested. Parts are cut to verify the machine capability. Charts from the test cutting are documented for your viewing. |
| Mechanical Specifications |
| Number of CNC controlled axes |
4 |
|
|
|
| Number of CNC controlled spindles |
1 |
| Pitch rating |
5.08 |
DP |
5 |
Mod |
| Maximum workpiece diameter (External) |
7.087 |
in |
180 |
mm |
| Maximum workpiece diameter (Internal) |
11.024 |
in |
280 |
mm |
| Maximum axial travel |
9.843 |
in |
250 |
mm |
| Worktable diameter |
9.843 |
in |
250 |
mm |
| Table bore diameter |
4.921 |
in |
125 |
mm |
| Maximum radial center distance |
11.220 |
in |
285 |
mm |
| Minimum radial center distance |
-1.181 |
in |
-30 |
mm |
| Maximum axial height from table top |
18.031 |
in |
458 |
mm |
| Minimum axial height from table top |
12.323 |
in |
313 |
mm |
| Maximum stroke length |
2.047 |
in |
52 |
mm |
| Stroking speed range |
50 |
to |
1250 |
RPM |
| Spindle Power |
20 |
HP |
15 |
kW |
| Rapid traverse radial |
70.866 |
in/min |
1800 |
mm/min |
| Rapid traverse axial |
70.866 |
in/min |
1800 |
mm/min |
| Rapid traverse speed of cutter |
5400 |
deg/min |
15 |
RPM |
| Rapid traverse speed of table |
5400 |
deg/min |
15 |
RPM |
| Machine Weight |
16502 |
lbs |
7500 |
kg |
| Plant power |
460 |
VAC |
60 |
Hz |
| Features |
| Tailstock with pressure adjustment |
| Power clamping with pressure adjustment |
| Hydrostatic guide assembly |
| Controls |
| Heckler & Koch 781CNC |
| Siemens DC servos |
| Heidenhain feedback systems |
| Base Software |
| M and G code programming using Lorenz cutting cycles. |
| Machine Includes |
| Integral Coolant Tank |
| One set of leveling wedges |
| Multiple cutter adapters |
| Multiple cams some with crowning |
| Two copies of the operations manuals |
| Two copies of the maintenance documentation |
| 30 Day warranty on machine |
| MTB Quality Checks and Repairs |
| Stroking head checked for problems |
| Work table drive system checked for problems |
| Guide and ball joint checked for problems |
| Hydraulic system drained and cleaned |
| All filters changed |
| Machine was thoroughly cleaned |
| All cycles were tested and are fully functional |
| All worn hoses replaced |
| Sample parts will be cut |
| |
|
|
|
|
| The aforementioned description and listing of specifications and accessory equipment is correct and accurate to the best of our knowledge. However, it should not be considered binding in any regard, as we reserve the right to change and/or alter same without prior notice. Consequently the buyer is responsible for confirming same, upon physical inspection and inventory of the machine(s) and all related accessory equipment. |
